Diagnostic Messages
User Warning Messages
| CAUSE | The completer specified in an inline |
|
| assembly call was invalid for the |
|
| opcode given. |
| ACTION | Check the architecture instruction |
|
| set specification to determine valid |
|
| completers. |
7100 | MESSAGE | code subspace has no unwind |
|
| subspace (7100) |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
7101 | MESSAGE | Improper completer ,completer |
|
| given for opcode opcode |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
7102 | MESSAGE | Immediate value of value for |
|
| |
|
| [0..31] |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
7103 | MESSAGE | Extract/deposit of value for field size |
|
| in opcode not in [1..32] |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
7104 | MESSAGE | Immediate value of value for |
|
| opcode is less than |
|
| to |
| CAUSE | Internal compiler error. |
| ACTION | Report error to your HP Service |
|
| Representative. |
180 | Chapter 8 |