HP UX Developer Tools manual 155

		Diagnostic Messages
		Error Messages
	ACTION	Consult the PA-RISC Architecture
		and Instruction Set Reference
		Manual, for the list of valid completer
		combinations for this instruction.
1005	MESSAGE	Unable to open xref file: %s
	CAUSE	Assembler could not create or access
		the file specified with the -v
		command-line option.
	ACTION	Insure that the directory is writable.
1007	MESSAGE	Label not allowed here in
		this expr
	CAUSE	Assembler will not allow a label here.
	ACTION	Expressions must be in the form
		label1[[-label2]+constant_exp]
		Reorder expression to be in the
		proper form.
1008	MESSAGE	Illegal symbol in expression
	CAUSE	An expression contains a sequence
		other than label operator term or term
		operator term
	ACTION	Place operators +, -, between a label
		and a term, or place operators +, -, *,
		/ between a term and term. Note that
		a term means a constant expression.
1009	MESSAGE	Field selector not allowed in
		pc-relative expression
	CAUSE	Field selector, such as L' or R' used on
		a expression that is a branch target.
	ACTION	Omit field selectors from branch
		target expression.
1010	MESSAGE	String not allowed in
		pc_relative expression
	CAUSE	String used for branch target
		expression.

Chapter 8 155