HP UX LDAP-UX Integration Software manual Opt/ldapux/config/setup

Administering LDAP-UX Client Services

Using The LDAP-UX Client Daemon

	- automount
	- automountMap
	- printers
setting	This will be different for each section.
value	Depending on the setting, this can be
	<yesnonumber>.
Section details Within a section, the following syntax applies:
[StartOnBoot]	Determines if ldapclientd starts automatically when
	the system boots.
	setting=value:
	enable=<yesno>
	By default, this is enabled after LDAP-UX has been
	configured by the LDAP-UX setup program
	/opt/ldapux/config/setup.
[general]	Any cache setting defined here will be used as the

default setting for all caches (passwd, group, netgroup, uiddn, domain_pwd and domain_grp).

setting=value:

max_conn=<2-500>

The maximum number of connections ldapclientd can establish to the directory server (or multiple servers when in a multi-domain environment.

The default value is 100.

connection_ttl=<1-2147483647>

The number of seconds before an inactive connection to the directory server is brought down and cleaned up. The default value is 300.

num_threads=<1-100>

The number of client request handling threads in ldapclientd.

The default value is 10.

socket_cleanup_time=<10-2147483647>

The interval, in seconds, before the next attempt to clean up the socket files created by any LDAP-UX client applications that were terminated abnormally. The default value is 300.

98 Chapter 4