HP UX LDAP-UX Integration Software manual Examples, General Syntax For Migration Scripts

	Installing And Configuring LDAP-UX Client Services
	AutoFS Support
DOM_ENV	This only applies to the migrate_nisp_autofs.pl
	script. This variable defines the fully qualified name of
	the NIS+ domain where you want to migrate your data
	from.

NIS_DOMAINNAME This only applies to the migrate_nis_automount.pl script. This variable specifies the fully qualified name of the NIS domain where you want to migrate your data from. This variable is optional. If the NIS domain name is not specified, LDAP-UX uses the value of the NIS_DOMAIN parameter configured in the /etc/rc.conf.d/namesvrs file.

Examples:

The following command sets the fully qualified name of the NIS+ domain to “cup.hp.com”:

export DOM_ENV=”cup.hp.com”

The following command sets the fully qualified name of the NIS domain to “india.hp.com”:

export NIS_DOMAINNAME=”india.hp.com”

The following command sets the base DN to “dc=cup, dc=hp, dc=com”:

export LDAP_BASEDN=”dc=cup, dc=hp, dc=com”

General Syntax For Migration Scripts

The migration scripts use the following general syntax:

scriptname inputfile outfile

where

scriptname Is the name of the particular script you are using.

inputfile Is the fully qualified file name of the appropriate AutoFS map that you want to migrate. For example,

/etc/auto_master.

outputfile This only applies to the migrate_nis_automount.pl and migrate_automount.pl scripts. This is optional and is the name of the file where the LDIF is written. stdout is the default output.

Chapter 2 63