HP UX LDAP-UX Integration Software manual 46

Installing And Configuring LDAP-UX Client Services

Configure the LDAP-UX Client Services

Press the return key if you choose to accept SIMPLE authentication method, type 2 if you choose SASL DIGEST-MD5 authentication method for the following prompt:

Authentication method: [1]:

Step 14. Next enter the host name and port number of the directory where your name service data is, from Appendix A, “Configuration Worksheet,” on page 183. For high availability, each LDAP-UX client can look for name service data in up to three different directory hosts. You can enter up to three hosts, to be searched in order.

Step 15. Enter the base DN where clients should search for name service data from Appendix A, “Configuration Worksheet,” on page 183.

Step 16. You can quickly configure a Netscape directory and the first client by accepting the remaining default configuration parameters when prompted.

Table 2-1 shows the configuration parameters and the default values they will be configured with.

Table 2-1	Configuration Parameter Default Values
	Parameter	Default
		Value
	Type of client binding	Anonymous
	Bind time limit	5 seconds
	Search time limit	no limit
	Use of referrals	Yes
	Profile TTL (Time To Live)	0 - infinite
	Use standard RFC-2307 object class attributes for	Yes
	supported services
	Use default search descriptions for supported services	Yes
	Authentication method	Simple

32 Chapter 2