Command and Tool Reference
Client Management Tools
Client Management Tools
This section describes the following programs for managing client systems. Most of these are called by the setup program when you configure a system.
display_profile_cache | Displays the currently active profile. |
create_profile_entry | Creates a new profile in the directory. |
get_profile_entry | Downloads a profile from the |
| directory to LDIF, and creates the |
| profile cache. |
ldap_proxy_config | Configures a proxy user. |
The following tools are called by the setup program and are not typically used separately.
create_profile_schema | Extends the schema in the directory |
| for profiles. |
create_profile_cache | Creates a new active profile from an |
| LDIF profile. This is also called by |
| get_profile_entry. |
The create_profile_entry Tool
This tool, found in /opt/ldapux/config, creates a new profile entry in an LDAP directory from information you provide interactively. The directory schema must have the DUAConfigProfile extensions.
Syntax
create_profile_entry
The create_profile_cache Tool
This tool, found in /opt/ldapux/config, creates a binary profile file from an LDIF profile file, thus activating the profile for the client. (You can download a profile to LDIF from the directory with get_profile_entry.) Typically you run the setup program instead of running this program directly. See also “Download the Profile Periodically” on page 74.
Chapter 5 | 143 |