HP UX LDAP-UX Integration Software Installing And Conﬁguring, LDAP-UXClient Services

2	Installing And Conﬁguring
	LDAP-UX Client Services

This chapter describes the decisions you need to make and the steps to install Netscape and conﬁgure LDAP-UX Client Services. This chapter contains the following sections:

•“Before You Begin” on page 9.

•“Summary of Installing and Conﬁguring” on page 10.

•“Plan Your Installation” on page 12.

•“Install LDAP-UX Client Services on a Client” on page 20.

•“Conﬁgure Your Directory” on page 21.

•“Import Name Service Data into Your Directory” on page 25.

•“Conﬁgure the LDAP-UX Client Services” on page 27.

•“Conﬁgure the LDAP-UX Client Serivces with SSL Support” on page 41.

•“Conﬁgure LDAP-UX Client Services with Publickey Support” on page 46.

•“AutoFS Support” on page 55.

•“Verify the LDAP-UX Client Services” on page 68.

•“Conﬁgure Subsequent Client Systems” on page 72.

•“Download the Proﬁle Periodically” on page 74.

•“Use r-command for PAM_LDAP” on page 76.

Before You Begin

This section lists some things to keep in mind as you plan your installation.

•Use the conﬁguration worksheet to record your decisions and other information you’ll need later for conﬁguration in Appendix A, “Conﬁguration Worksheet,” on page 183.

•See the LDAP-UX Integration B.04.00 Release Notes (J4269-90042) at http://docs.hp.com/hpux/internet for last-minute information.

•You must have an LDAP directory. You can obtain the Netscape Directory Server for HP-UX version 6.x from your local HP sales ofﬁce or www.hp.com and view the documentation at http://docs.hp.com/hpux/internet/#Netscape%20Directory%20Server.

Chapter 2