Installing And Configuring LDAP-UX Client Services

Configure the LDAP-UX Client Services

1.automountMapName ->[automountMapname] 2.automountKey -> [automountKey] 3.automountInformation -> [automountInformation]

Specify the attribute you want to map. [0]:

You type 1 for the following question and press the return key:

Specify the attribute you want to map. [0]:1

4.Next, type the attribute nisMapName that you want to map to the automountMapName attribute for the following question and press the return key:

automountMapName -> nisMapName

5.Next, it will take you to the screen which shows you the following information:

Current Automount attribute names:

1.automountMapName ->[nisMapname] 2.automountKey -> [automountKey] 3.automountInformation -> [automountInformation]

Specify the attribute you want to map. [0]:

If you want to specify the attribute to map to the automountKey attribute , then type 2 for the following question and press the return key:

Specify the attribute you want to map. [0]:2

6.Next, type the attribute cn you want to map to the automountKey attribute and press the return key:

automountKey -> cn

7.Next, it will take you to the screen which shows you the following information:

Current Automount attribute names:

1.automountMapName ->[nisMapname] 2.automountKey -> [cn] 3.automountInformation -> [automountInformation]

Specify the attribute you want to map. [0]:

Chapter 2

37