Administering
Using The
A negative cache is used to store the automount entry data about
setting=value
enable=<yesno>
ldapclientd only caches entries for this section, when it is enabled. By default, caching is enabled.
The time, in seconds, before a cache entry expires from the positive cache. The default value is 1800 (30 minutes).
The time, in seconds, before a cache entry expires from the negative cache.
The default value is 1800 (30 minutes).
[automountMap] Cache settings for the automount map cache.
| setting=value |
| enable=<yesno> |
| ldapclientd only caches entries for this section, when |
| it is enabled. By default, caching is enabled. |
| |
| The time, in seconds, before a cache entry expires from |
| the positive cache. The default value is 1800 (30 |
| minutes). |
| |
| The time, in seconds, before a cache entry expires from |
| the negative cache. |
| The default value is 7200 (2 hours). |
[printers] | Any printer setting defined here will be used by the |
| LDAP printer configurator. |
| start=<yesno> |
| Determines if the printer configurator service will start |
| when ldapclientd is initialized. If it is enabled, the |
Chapter 4 | 103 |