setting up and using your workstation
setting up your hp workstation x1100
setting up your hp workstation x1100
WARNINGIf you have any doubt that you can lift the workstation or monitor safely, do not try to move them without help.
1.Check the materials list shipped with your workstation to verify that you have all of the components necessary for setting up your workstation.
2.Place the workstation in an area with easily accessible power outlets and enough space for the keyboard, mouse, and any other accessories.
3.Position the workstation so that its rear connectors are easily accessible.
installation tools
No tools are required to set up your workstation. However, if you plan to install or replace an accessory inside your workstation, you will need a
connecting devices
Before connecting any cords or cables to your workstation, please read the Warning Notices in the Preface of this manual.
If you purchased a graphics card that was not installed in your workstation at the factory, you must install that card now. To install, refer to the instructions that came with the card or see the x1100 Technical Reference available at: www.hp.com/go/workstationsupport.
16 | Chapter 1 |