
Linux system setup and recovery
configuring your Linux workstation
summary
This completes the miscellaneous parameters you can set from the Linux Setup Tool window. If you want to erase the changes you have made and keep the current configuration settings, click on the “Reset Configuration” button. To see the parameters you have chosen, click on the “Show Summary” button.
The “Show Summary” window, shown below, contains all the information you entered. Click the OK button to exit the “Show Summary” window.
If you need to make changes to any of the parameters listed in the “Show Summary” window, click on the appropriate functionality tab for that parameter and make the changes. Once you have all the parameters set to the values you need, you can click on the Save button to complete the setting of these changes.
NOTE | The system will not let you exit until you have set the root password. |
|
|
Chapter 2 | 53 |