
setting up and using your workstation
starting and stopping your Linux workstation
| initializing your software |
| Do NOT switch OFF the workstation while the software is being |
NOTE | |
| |
|
|
To initialize your software:
1.Turn on the display first, and then turn on the Linux workstation.
2.When the workstation is switched on, it performs a
If there is an error in the POST, the error will automatically be displayed. For details, see the section “if a POST error message is displayed” in the chapter “troubleshooting your Linux workstation.”
3.If you have set a password in the workstation’s
stopping your Linux workstation
To stop the workstation (when running an operating system), make sure that you have exited all application programs and then use the operating system’s Shutdown command. Then press the On/Off button on the control panel. If you stop the workstation without following these instructions, data loss or a damaged file system may result.
30 | Chapter 1 |