setting up and using your workstation

removing and replacing the cover and front bezel

replacing the cover and front bezel

1.Ensure that all internal cables are properly connected and safely routed.

2.Ensure that the bezel is correctly oriented, align the two plastic bezel hinges with their bezel slots on the right-hand side of the chassis, and swing the bezel closed. Confirm that the bezel latches as shown in Figure 1-8are seated flat against the chassis.

Figure 1-9 Inserting the Bezel Hinges into their Slots on the Workstation

Bezel Hinge

Bezel Hinges

Slots

 

Chapter 1

27