
setting up and using your workstation
removing and replacing workstation components3.Insert the flanges located on the bottom edge of the cover into their slots on the bottom left edge of the workstation. See Figure
Cover Flanges
Cover Slots
4.Lock the cover using the key provided, if required. Reconnect all the power and telecommunication cables.
removing and replacing workstation components
Instructions for removing and replacing workstation components, such as the power supply, can be found in the x1100 Technical Reference located at this web site:
www.hp.com/go/workstationsupport
This web site contains a wide range of free information, including downloadable documentation, service and support options, and the latest versions of drivers and utilities.
28 | Chapter 1 |