5.Change appropriate connection settings.
6.Click the Save Settings button. Click OK in the message confirming that the settings were saved.
7.Select \etc.
8.Click Save.
9.Click the Connect button to connect
10.If the HP SAM client is closed, it should start automatically. If it does not start,
Additional settings can be set by manually editing the .SAM files (configuration files).
1.The HP SAM connection client searches first for the
2.It then checks the access device file, /root/writable/opt/hpsam/hprdc_accessdevice.sam. Parameters found in the access device file replace or are added to the merged file.
3.Then, the connection client checks the file, /root/writable/opt/hpsam/hprdc_admin.sam. Parameters found in the global file replace or are added to the merged file.
Refer to Configuration Settings on page 38 for a list of the options available for the Linux Client.
HP ThinPro GT Client for the HP gt7725 Thin Client
For the HP gt7725 thin client running HP ThinPro GT, use the following procedure to install or update the HP SAM Client:
1.Edit the file /etc/apt/sources.list and verify the following line exists (if it does not, add it): deb ftp:// ftp.hp.com/pub/tcdebian gt7725 main
2.Save the file, then update the list with the following command:
3.Set your http_proxy environment variable, if necessary. Run the following command: export
4.To install the HP SAM Client, run the following command:
Additional settings can be set by manually editing the .SAM files (configuration files).
1.The HP SAM connection client searches first for the
2.It then checks the access device file, /opt/hpsam/hprdc_accessdevice.sam. Parameters found in the access device file replace or are added to the merged file.
3.Then, the connection client checks the file, /opt/hpsam/hprdc_admin.sam. Parameters found in the global file replace or are added to the merged file.
Refer to Configuration Settings on page 38 for a list of the options available for the HP ThinPro GT Client.
Install and Validate the HP SAM Client Software | 37 |