NOTE: The UILanguage specified must either be the same language as the HP SAM client application that you have installed or English. If you installed the English HP SAM client application, do not change the value to any other language. To minimize disk space, the English HP SAM client application does not contain any other HP SAM client language DLL.
●EnableServer—integer value, 0 or 1. If set to 1, the HP SAM Server box on the main application dialog is visible. If set to 0, the field is not displayed. If the field is turned off, the value is still required and must be defined in the configuration file. Default is 1.
●EnableDomain—integer value, 0, 1, or 2. When set to 1, the Domain box on the main application dialog is visible. If set to 0, the field is not displayed. If the field is turned off, the domain specified using the DefaultDomain setting is applied (unless the username is entered in UPN or domain\username format with a different domain). If set to 2, the field is visible but cannot be edited. The domain set via DefaultDomain is always in effect and cannot be overridden using UPN or domain\username format. Default is 1.
●KioskMode—integer value. Not valid for Blade Workstation Client series. When set to non-zero, the user interface is altered for use in a kiosk-mode environment. Valid values include:
◦Bit 1 – Enable/disable the Cancel button (if 1, disable)
◦Bit 2 – Enable/disable the Minimize toolbar button (if 1, disable)
◦Bit 3 – Enable/disable the Close toolbar button (if 1, disable)
Default value is 0 (all features are enabled). For example, to turn off the Cancel and Minimize buttons and leave the Close button on, set the value to 3.
●DisplayShutdown—integer value, 0 or 1. When set to 1, an action button is added to the client user interface to enable the user to shut down the access device. This is the same button created by the DisplayShutdown, DisplayRestart, and DisplayLogoff options. If the button already displays from another option setting, the Shutdown option is added to the button drop- down. Not valid for Blade Workstation Client series or Linux Client. The default value is 0 (do not show).
●DisplayRestart—integer value, 0 or 1. When set to 1, an action button is added to the client user interface to enable the user to restart the access device. This is the same action button created by the DisplayShutdown, DisplayRestart, and DisplayLogoff options. If the button already displays from another option setting, the Restart option is added to the button drop- down. Not valid for Blade Workstation Client series or Linux Client. The default value is 0 (do not show).
●DisplayLogoff—integer value, 0 or 1. When set to 1, an action button is added to the client user interface to enable the user to log off the access device. This is the same action button created by the DisplayShutdown, DisplayRestart, and DisplayLogoff options. If the button already displays from another option setting, the Logoff option is added to the button drop-down. Not valid for Blade Workstation Client series or Linux Client. The default value is 0 (do not show).
●DefaultSessionAction—integer value, 0, 1, or 2. When set to 0, the default session action (pressing the button without dropping down the list) for the button is Shutdown. If set to 1, the default action is Restart. If set to 2, the default action is Logoff. If only one action is enabled, that option is the default action, and this setting is ignored. If this value corresponds to an action that is not enabled, no default action is available. Not valid for Blade Workstation Client series or Linux Client. The default value is 0.
