4.With the battery bay toward you, slide the service cover release latch to the left (3), and if you choose to, insert and tighten the optional screw (4) to hold the service cover in place. Slide the release latch to the right (5) to lock the service cover.

NOTE: If you want to use the optional screw, it is stored inside the service cover.

5.Insert the battery (see Inserting or removing the battery on page 31).

Replacing or upgrading the hard drive

CAUTION: To prevent information loss or an unresponsive system:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in Suspend, or in Hibernation.

If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.

Removing the hard drive

To remove a hard drive:

1.Save your work.

2.Shut down the computer and close the display.

3.Disconnect AC power and all external hardware devices from the computer.

4.Turn the computer upside down on a flat surface.

5.Remove the battery. (See Inserting or removing the battery on page 31).

Replacing or upgrading the hard drive 39