HTC Hero manual End-of-Call Options, Saving a Phone Number, Finding a Phone Number, Speed Dialing

End-of-Call Options

After you receive a call from or make a call to a phone number that is not in your People list, you can choose to save the number to People. On the Phone screen, tap at the right side of the number to add the new number to People. (See “Saving a Phone Number” on page 16.)

Tip

After receiving a call from a phone number that is not in your People list, an options menu is briefly displayed to allow you to save the number to People. On the options menu, tap Yes, create new contact.

Saving a Phone Number

Store contacts entries in your device. Your device automatically sorts People entries alphabetically. (For more information, see “People” on page 38.)

To save a number from standby mode:

1.Press .

2.Enter the phone number by tapping the keys on the keypad.

3.Tap Save to People. (This button appears after tapping six digits.)

4.Tap Create new contact or Save to existing contact.

5.Use the keyboard to enter the new contact name and tap Save to save the new entry.

– or –

Tap an existing contact name and tap Save to save the new number.

Finding a Phone Number

You can search People for entries by name.

1.Press , tap People, and then press .

2.Enter the first letter or letters of an entry. (The more letters you enter, the more specific the search.)

3.Tap the contact to display his/her contact information.

Dialing From the People List

1.Press and tap People.

2.Tap the entry you want to call.

3.Tap Call [Type of Number] (For example, Call Mobile.)

Speed Dialing

You can store up to nine numbers in your device’s speed dial memory.

Press and hold the appropriate key for approximately two seconds. The display confirms that you have dialed the number when it shows “Dialing” at the upper-right side of the screen.

Note

Speed dialing is not available when you are roaming; when you are roaming off the Nationwide Sprint Network, you must always dial using eleven digits (1 + area code + number).

16 2A. Device Basics