Troubleshooting

Problem: Poor color

Adjust Brightness.

Adjust Color.

Adjust Tint.

Adjust Red, Green, and Blue.

Use a shorter cable between video source and the projector.

Verify that the projector is set to receive the appropriate video broadcast format.

Problem: Only the test pattern is displayed

Verify all cable connections. Check to see that the cable is connected to the graphics/monitor port on the computer.

Check that your computer graphics system is set up correctly. If you have a CGA or EGA board, you cannot use the cable that was shipped with the LitePro (it’s a VGA cable). Call In Focus to order a CGA/EGA cable.

Make sure your computer’s graphics board or external video board is turned on.

Problem: No image on the computer screen

Make sure the monitor is turned on.

Verify that the VGA cable is connected correctly.

Problem: No sound

Verify audio input/output connections.

Adjust Audio Source.

Adjust Volume.

Press the Mute button.

Adjust Fade to balance the internal and any external speaker.

Problem: Image is too wide or narrow for screen

• Adjust Tracking to reduce or enlarge the projected image.

LitePro 580 User’s Guide

57

Page 60
Image 60
Hubbell 580 manual Problem Poor color, Problem Only the test pattern is displayed, Problem No image on the computer screen