Hubbell 580 manual Using the control icons

Using LP Utilities

Using the control icons

The LP-Link function controls are the same as those on the projector and the remote. Select a button to change its setting. Select and hold down the mouse button to increase or decrease values. A list of the controls follows:

	LP-Link control icons
Icon	Command	Function
	Standby	Turns projector lamp on and off.
		(If the LitePro is in standby mode,
		this is the only icon that is
		displayed.)
	Sync (-)	Adjusts a flickering or blurred
		image. Synchronizes the projector
		to the computer or video input
		signals.
	Sync (+)	Adjusts a flickering or blurred
		image. Synchronizes the projector
		to the computer or video input
		signals.
	Bright (-)	Decreases the brightness of the
		image.
	Bright (+)	Increases the brightness of the
		image.
	Volume -	Decreases the volume.
	Volume (+)	Increases the volume.
	Custom	Carries out a function you have
		assigned with the Custom Key
		menu.
	Source	Selects either a computer or a
		video device as the source of the
		signal to be projected.
	Freeze	Freezes the image. To cancel, click
		the icon again.
	Mute	Shuts off the audio. To cancel,
		click the icon again.

36 LitePro 580 User’s Guide