Introduction
Cables and adapters
The LitePro 580 comes with these cables and adapters:
•VGA cable, a
•Two Macintosh adapters for the VGA cable.
•Audio/video cable to connect the LitePro to your video equipment.
•LP Utilities serial cable to connect the LitePro to your computer.
•Macintosh adapter for the LP Utilities serial cable.
•Power cord.
Usage guidelines
•The LitePro can become very warm during use. Make sure there is no flammable material such as paper or cloth under, on, or near the projector. Use extreme care when handling the projector. We recommend that you let the projector cool before lifting it.
•Do not block the ventilating grill on the left side of the projector. Restricting the air flow can cause it to overheat and shut down automatically.
•Do not place objects on or insert metallic objects in the projector.
•Avoid leaving the LitePro in direct sunlight or extreme cold for extended periods of time. If this happens, allow it to reach room temperature before use.
•Do not expose the LitePro to moisture or dust.
•Handle the LitePro as you would any product with glass components. Do not drop it.
•Transport the LitePro in the original shipping carton or vendor- approved hard or soft case.
LitePro 580 User’s Guide | 5 |
