Husqvarna 1018855-26, 965030298, 965030296 manual Safety Equipment

SAFETY EQUIPMENT

Saws 61, 268, 268K, 272XP, 272K, 272S, 281XP, 288XP and 394.

Dismantle the throttle pin (B) by using a punch.

B

Dismantle the throttle. On saw 394, also remove the throttle cable.

Saws 40 and 45

Remove the three screws in the side of the handle as well as the screw holding the spring under the handle.

Lift out the throttle lock and the throttle.

Saws 36, 41, 42, 55, 242XP, 246, 51, 254XP, 257 and 262XP.

Remove the rubber element (A). Slide out the throttle pin (B) and lift out the throttle arm

and spring.

B A

A

Saw 3120

Remove the three pins with a punch.

Press the throttle lock down and move it and the trigger forwards until the back edge of the lock appears.

Lift out the trigger lock.

Lift out the throttle with cable from the front.

Remove the springs where appropriate.

English – 53