Husqvarna 1018855-26, 965030298, 965030296 manual Walbro WT, ZAMA C1Q-EL1, Carburettor

CARBURETTOR

Walbro WT

1.Remove the cover (A) over the metering unit and carefully remove the control diaphragm (B) with the gasket.

2.Undo the screw (H) and take out the needle valve (C) with lever arm, shaft and spring.

3.Remove the cover (E) over the pump unit and carefully remove the gasket (F) and the pump diaphragm (G).

4.Using a needle or the like carefully remove the fuel screen (D).

5.Unscrew the high and low speed jet screws.

6.Remove the plug (J). See page 85.

7.If necessary remove the throttle and choke valves as well as the shafts, lever arms and springs.

8.Remove the ”semi fixed jet” with diffuser jet (K). See page 85.

E

DF

G

C

J

B H K

A

ZAMA C1Q-EL1

1.Remove the cover (A) over the metering unit and carefully remove the control diaphragm (B) with the gasket.

2.Undo the screw (H) and take out the needle valve (C) with lever arm, shaft and spring.

3.Remove the cover (E) over the pump unit and carefully remove the gasket (F) and the pump diaphragm (G).

4.Using a needle or the like carefully remove the fuel screen (D).

5.Unscrew the high and low speed jet screws.

6.If necessary remove the throttle and choke valves as well as the shafts, lever arms and springs.

A

B

H

C

K

D

G

F

E

English – 89