Husqvarna 965030296 manual Safety Equipment, Assembly, The liquid and its vapours are poisonous

SAFETY EQUIPMENT

Assembly

Saws 36, 40, 41, 45, 42, 242XP, 246, 51, 55, 254XP, 257 and 262XP.

Other saws.

!WARNING!

The fuel used in the chain saw poses the following hazards:

1.The liquid and its vapours are poisonous.

2.Can cause skin irritation.

3.Is highly inflammable.

Fit springs in appropriate cases.

Saws 36, 41, 42, 242XP, 246, 51, 55, 254XP, 257, 262XP and 394.

Saws 61, 268, 268K, 272XP, 272K, 272S, 281XP and 288XP. See next page.

Saws 40, 45.

Saw 3120.

On saw 394, fit the cable to the trigger. Insert them into the handle from the front.

Fit the cable to the trigger and install the throttle lock and trigger.

Fit the trigger with the cable from the front.

Fit the pin (B) and spring (when used).

B

Fit the side of the handle using three screws on the side and one underneath, which holds the spring.

Fit the spring and slide the throttle lock forwards from above so that its rear edge can be slid in under the edge of the handle.

All saws except 40 and 45 continue on the next page.

English – 55