Husqvarna 965030298, 965030296, 1018855-26 manual Lubrication System, English

LUBRICATION SYSTEM

Saw 394.

Dismantle the oil pump as follows:

1.Dismantle the screw (A) so that the spring and latch pin (B) can be removed.

2.Lever out the pump piston (C) with the plastic plug (D) using a screwdriver.

3.Remove the seal (E).

C D

B

E

A

Saw 3120.

Undo the three bolts that hold the oil pump and lift up the pump by the cut-out for the adjuster screw. Lift off the pump and loosen the wire for manual oil supply.

Dismantle the oil pump as follows:

1.Undo the screws (A) and remove the parts as shown in the figure below.

2.Undo screw (B). NOTE! Left-hand thread.

B A

72 – English