Husqvarna 965030296 Carburettor, Dismantling, The liquid and its vapours are poisonous, Plugs

CARBURETTOR

Dismantling

!WARNING!

The fuel used in the chain saw poses the following hazards:

1.The liquid and its vapours are poisonous.

2.Can cause skin irritation.

3.Is highly inflammable.

Dismantle all parts necessary and remove the carburettor from the saw. On some models the cylinder needs to be loosened and lifted to be able to remove the carburettor.

See the carburettor in question on the next four pages and the instructions below.

Plugs

When cleaning the carburettor the plugs must be removed. Remove as follows:

1.Drill a hole in the plug.

2.Insert a screwdriver or punch in the hole and prise up the plug.

”Semi fixed jet”/”fixed jet”

Some carburettors have an extra jet (semi fixed jet). The jet is of brass and is located in the metering unit and is used to give a fuel supplement. On average 10% of the fuel passes through the jet.

Below or next to the jet is a screen which needs to be cleaned.

Dismantle the jet and/or screen in one of the following ways:

1.Knock the unit into the venturi using a punch and take the unit apart. (some Tillotson models).

2.Dismantle the lock washer over the jet and lift off the jet and screen.

English – 85