Husqvarna 965030298, 965030296, 1018855-26 manual Starter, Dismantling, Wear protective glasses

STARTER

Dismantling

Dismantle the starter

See the operating instructions.

Pull out the cord 20-30 cm andinsert it into the cut-out in the starter pulley rim.

Some saws have several long cut-outs.

Rotate the starter pulley anticlockwise until the spring-tension on the starter pulley ceases.

Dismantle the starter pulley's centre bolt and washer.

!WARNING!

If the spring tension is released when lifting the starter pulley, the spring can fly out and cause per- sonal injury!

Wear protective glasses!

Lift out the starter pulley carefully.

If the starter has a cord guide (A), remove this

If the cord is to be replaced, cut it off and pull out the bits from the handle and starter pulley using a pair of long nosed pliers.

!WARNING!

Ensure that the spring does not fly out and cause personal injury! Wear protective glasses!

If the spring is to be replaced, remove the old spring from the starter pulley. Some saws have a protective plate over the spring.

A

English – 57