Husqvarna 1018855-26, 965030298, 965030296 manual Lubrication System

LUBRICATION SYSTEM

Saws 61, 268, 272XP.

Dismantle the oil pump as follows:

		F
1.	Remove the lock washer (A), washer,	B
	spring and adjuster screw (B).
2.	Remove the locking lacquer and undo	G
	screw (C).

3.Knock the edge of the pump housing against a piece of wood so that the pump piston (D) slides out of the housing.

4.Remove the pinion (E) with washers and springs.

5.Remove the pin (F).

6.Remove the seal (G).

7.If necessary remove the O-ring (H).

E C D

A

H

Saws 281XP and 288 XP.

Dismantle the oil pump as follows:

1.Undo the adjuster screw (A).

2.Remove the plug (B) with pump piston

(C) and spring with washers.

3.Dismantle the O-ring (D). Replace if necessary.

4.If necessary, replace the seal (E).

5.If necessary, replace the O-ring (F).

C B

F

A

D

E

English – 71