Husqvarna 965030298, 965030296, 1018855-26 manual Crankcase And Crankshaft, Assembly

CRANKCASE AND CRANKSHAFT

Assembly

Saws 36 and 41.

Saws 40 and 45.

See page 120.

Other saws

Fit the bearing and seals on the crankshaft. Grease the seals.

Continue assembly as described on page 111.

NOTE!

Ensure that dirt and foreign particles do not enter the bearing.

If new seals need to be fitted in the crankcase, grease the sealing surfaces and knock in the seals using respective punchs (see ”Service tools”).

The seals can also be fitted when the crankcase is in position.

!WARNING!

The crankcase halves can be hot. Risk of burns. Wear protective gloves.

If the bearing needs to be fitted proceed as follows:

A. Heat the crankcase half in question to 200°C.

B. Wear protective gloves, take out the crankcase half and press in the bearing.

C. Let the crankcase half cool before continuing work.

Assembly position. See pages 123 and 124.

See continuation on next page.

English – 117