Husqvarna 965030296 manual Carburettor, Assembly, Plugs, The fluid and its vapours are poisonous

CARBURETTOR

Assembly

Refer to the carburettor in question on the next eight pages. A pressure test, see page 100, should be carried out after assembling and before the carburettor is refitted to the saw.

Plugs

When cleaning the carburettor the plugs must be removed.

Reassemble as follows:

1.Place the plug in the hole with the convex side facing upwards.

2.Expand the plug by using a punch on the top side.

!WARNING!

The fuel used in the chain saw poses the following hazards:

1.The fluid and its vapours are poisonous.

2.Can cause skin irritation.

3.Is highly inflammable.

”Semi fixed jet”/”fixed jet”

Some carburettors have an extra jet (semi fixed jet). The jet is of brass and is located in the metering unit and is used to give a fuel supplement. On average 10% of the fuel passes through the jet.

Below or next to the jet is a screen which needs to be cleaned.

Reassemble the jet and/or screen in one of the following ways:

1.Put together the unit and fit it in the carburettor by means of a punch (Some Tillotson models).

2.Fit the jet with screen and lock washer.

English – 91