hussman P/N 0420057_B P/N 0420057B, Drip Tray Connector Drip Tube, Installing Optional Wrap Board

P/N 0420057_B			1-9
From the back of the case, hang the coil cover			REMOVING PROTECTIVE FILM FROM BUMPER
from the top hooks, then position the drip tray in
the case with the drip tube connection to your			Remove protective film from bumper once
right. Hang drip tray on two back hooks and two			installation is complete.
front hooks.
Front	Back	Coil
	Coil
	Cover	Cover
Coil		Hooks

Drip Tray Hooks

Drip Tray Hooks

Drip Tray

Connect installed copper drip tube to drip tray using flexible connector supplied.

Ensure condensate flows freely from drip tray through drip tube. Check the drip tube connec- tion for leaks before stocking.

Drip Tray

Connector

Drip Tube

Installing Optional Wrap Board

MOA 0470438

1.Turn off power to case.

2.Determine location by positioning the wrap board on the rear of the case between door frames.

Rear View of Case - Location of Backups

Backup

2.668

TYP

19.327

TYP

7.562		7.874	7.874	7.562
12-Ft	36.717	40.193		36.717
8-Ft	36.668			36.668
6-Ft	24.656			24.656
4-Ft	33.125

Notes:

1.All dimensions given in inches.

2.For location of Backups on cases with add-on wedge, start measuring from the square end of the case opposite the wedge end. Use corresponding case size dimensions.

3.For location of Backups on 7-Ft cases (facing rear of case)

use 6-Ft case dimensions on the left and 8-Ft case dimensions on the right.

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A. Service Merchandisers