REPLACING SINGLE PANE FRONT GLASS (Requires more than one person.)
!WARNING
Once set screws are loose, the glass and glass clamp have NO support or retain- ers. Support the front glass at all times until the top glass clamp and set screws are secured, or glass is removed.
1.Raise the front glass to open completely.
2.Loosen all set screws along the inside bottom of the glass clamp.
Note: All cylinders do not have to be removed to remove the glass
IMPORTANT
When reinstalling glass, be certain that:
1.Gasket is on glass evenly.
2.Glass bottom is fully in retainer.
3.When set screws are tightened, glass is firmly held in place by the glass clamps.
Set Screw Locations
Fully Engage Glass
in Clamp
Gasket
P/N 0420057_B
