hussman P/N 0420057_B P/N 0420057B, Shipping Damage, Apparent Loss or Damage, Exterior Loading

1-2INSTALLATION

NOTICE

Do NOT remove shipping braces until the merchandisers are positioned for installation. Frames may be damaged.

SHIPPING DAMAGE

All equipment should be thoroughly examined for shipping damage before and during unload- ing. This equipment has been carefully inspected at our factory. Any claim for loss or damage must be made to the carrier. The carrier will provide any necessary inspection reports and/or claim forms.

Apparent Loss or Damage

If there is an obvious loss or damage, it must be noted on the freight bill or express receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim.

Concealed Loss or Damage

When loss or damage is not apparent until after equipment is uncrated, retain all packing materi- als and submit a written request to the carrier for inspection, within 15 days.

!WARNING

Do not stand or walk on top of case

because falling off could

cause serious personal injury.

EXTERIOR LOADING

Do NOT walk on top of merchandisers or damage to the merchandisers and serious person- al injury could occur. Merchandisers ARE NOT

STRUCTURALLY DESIGNED TO SUPPORT EXCESSIVE

EXTERNAL LOADING such as the weight of a person. Do not place heavy objects on the case.

MERCHANDISERS SHIPPED

WITH END INSTALLED

If the case was shipped with the end installed, two long bolts were used to hold the shipping brace to the end. If the shipping bolts are re- inserted after removing the brace, they will extend into the product area. Therefore, be sure to replace these bolts with the shorter bolts provided. Refer to the detailed information provided in the separate End Kit Instruction shipped with each end.

Note: Be careful not to damage the factory installed end while moving the case. Make sure that tools are positioned past the end and beneath the merchandiser’s support bar.

SHIPPING BRACES

Move the fixture as close as possible to its per- manent location and then remove all packaging and shipping braces. Check for damage before discarding packaging. Remove all separately packed accessories such as kits, and shelves.

Remove all nut retainers used with shipping braces. NSF certification requires the use of ANSI Standard nuts and bolts with not more than two (2) threads showing after installation.

SHIPPING RIDER

Each case is shipped on a rider to protect factory-installed legs, and to make positioning the case easier. Remove the rider after the case has been positioned.

Note: Once the rider is removed, the case must be lifted –NOT PUSHED– to reposition.

P/N 0420057_B U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM