hussman P/N 0420057_B P/N 0420057B, Reassemble in reverse order, Removing Scratches From Bumper

5-6MAINTENANCE

STEP 16 – Reassemble in reverse order.

Turn on power, then refrigeration. Make certain merchandiser has cooled to operating temperature before restocking.

CLEANING ANTI-REFLECTIVE GLASS

Anti-Reflective Glass

While the anti-reflective coatings are durable, they are susceptible to scratching if abrasive materials are used for cleaning. Once the glass surfaces are scratched, it is impossible to restore the original finish. Special care must be taken to prevent damage when cleaning the glass.

Anti-reflective glass can be cleaned with clear water or any non-alkaline detergent. However, it is very important to use a soft cloth, a micro-fiber cleaning cloth or a wet sponge.

Never use the following types of materials to clean glass with anti-reflective coatings:

•Coarse Paper Towels

•Scouring Pads or Powders

•Steel Wool or Steel Fiber Materials

•Blades

•Acidic or highly Alkaline detergents

•Fluorine based detergents

REMOVING SCRATCHES FROM BUMPER

Most scratches and dings can be removed using the following procedure.

1.Use steel wool to smooth out the surface area of the bumper.

2.Clean area.

3.Apply vinyl or car wax and polish surface for a smooth glossy finish.

P/N 0420057_B U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM