P/N 0420057_B |
MAINTENANCE
CARE AND CLEANING
Long life and satisfactory performance of any equipment is dependent upon the care it receives. To ensure long life, proper sanitation and minimum maintenance costs, these mer- chandisers should be thoroughly cleaned, all debris removed and the interiors washed down, at least weekly.
Exterior Surfaces
The exterior surfaces must be cleaned with a mild domestic detergent and warm water to protect and maintain their attractive finish.
NEVER USE ABRASIVE CLEANERS OR SCOURING PADS. DO NOT USE AMMONIA BASED CLEANERS ON ACRYLIC PARTS.
Interior Surfaces
The interior surfaces may be cleaned with most domestic detergents, ammonia based cleaners and sanitizing solutions with no harm to the surface. Removable parts are labeled REMOVE
FOR CLEANING.
Removable stainless steel parts may be cleaned and sanitized in dishwasher.
See next page for detailed direction.
NOTICE
Product will be degradedand may spoil if allowed to sit
in a!CAUTION
Do NOT use HOT water on COLD glass surfaces. This can cause the glass to shatter and could result in personal injury. Allow glass fronts, ends, and service doors to warm before applying hot water.
! WARNING |
Prevent injury. |
ALWAYS SHUT POWER OFF |
during cleaning process. |
Do Not Use:
•Abrasive cleansers and scouring pads, as these will mar the finish.
•A hose on lighted shelves or submerge the shelves in water.
•Solvent, oil or acidic based cleaners on any interior surfaces.
Do:
•Remove the product and all loose debris to avoid clogging the waste outlet.
•Store product in a refrigerated area such as a cooler. Remove only as much product as can be taken to the cooler in a timely manner.
•Turn off refrigeration, then disconnect electrical power.
•Thoroughly clean all surfaces with mild detergent and water (105 to 140°F / 40 to
60°C). DO NOT USE STEAM OR HIGH WATER
PRESSURE HOSES TO WASH THE INTERIOR.
THESE WILL DESTROY THE MERCHANDISER’S LINER AND SEALS CAUSING LEAKS AND POOR PERFORMANCE.
•Lift or remove fan plenum for cleaning. Hook chain in rear panel to secure plenum during cleaning. Be sure to reposition the fan plenum after cleaning merchandiser.
•Take care to minimize direct contact between fan motors and cleaning or rinse water.
•Rinse with water, but do NOT flood. NEVER
INTRODUCE WATER FASTER THAN THE WASTE OUTLET CAN REMOVE IT.
•Allow merchandisers to dry before resuming operation.
•After cleaning is completed, turn on power to the merchandiser.
HUSSMANN CORPORATION, Bridgeton, MO | Service Merchandisers |
