Encrypting the disk
107
Administrative support
Encrypting the disk
Warning: All resources on the hard disk will be deleted. (Resources residing in flash memo ry or in RAM remain
unaffected.)
Note: This setting is only available when a hard disk is installed.
1Turn the printer off.
2Press and hold and while turning the printer on.
3Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4Press until Disk Encryption appears, and then press .
5Press until Enable appears, and then press .
Contents will be lost. Continue? appears.
6Press until Yes appears, and then press .
The Encrypting Disk progress bar appears.
7When disk encryption has finished, click .
8Press until Exit Config Menu appears, and then press .
To disable disk encryption:
1Turn the printer off.
2Press and hold and while turning the printer on.
3Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4Press until Disk Encryption appears, and then press .
5Press until Disable appears, and then press .
Contents will be lost. Continue? appears.
6Press until Yes appears, and then press .
The Encrypting Disk progress bar appears.
7When disk encryption has finished, click .
8Press until Exit Config Menu appears, and then press .