Printing multiple-language PDFs

95

Troubleshooting
Printing multiple-language PDFsSolving printing problems
Symptom Cause Solution
Some documents do not
print. The documents contain
unavailable fonts. 1Open the document you want to print in Adobe Acrobat.
2Click the printer icon.
The Print dialog appears.
3Check the Print as image box.
4Click OK.
Symptom Cause Solution
The operator panel
display is blank or
displays only diamonds.
The printer self test
failed. Turn the printer off, wait about 10 seconds, and turn the printer
back on.
If the Performing Self Test and Ready messages do not
appear, turn the printer off and call for service.
The message USB
device unsupported
appears when using a
USB device.
The USB device you are
using may not be
supported or has an
error. Only specific USB
flash memory devices
are supported.
For information regarding tested and approved USB flash me mory
devices, contact the place where you bought the printer.
Jobs do not print. The printer is not ready
to receive data. Make sure Ready or Power Saver appears on the display before
sending a job to print. Press to return the printer to the Ready
state.
The specified output bin
is full. Remove the stack of paper from the output bin, and then press
.
The specified tray is
empty. Load paper in the tray.
You are using the wrong
printer driver or are
printing to a file.
• Verify you are using the printer driver associated with your
printer.
• If you are using a USB Direct interface, make sure you are
running Windows98/Me, Windows 2000, WindowsXP, or
WindowsServer 2003 and using a Windows98/Me,
Windows2000, Windows XP, or WindowsServer 2003
compatible printer driver.
Your internal print server
is not set up properly or
is not connected
properly.
Verify that you have properly configured the printer for network
printing.
You are using the wrong
interface cable, or the
cable is not securely
connected.
Make sure you are using a recommended interface cable.
Make sure the connection is secure.