Solving print quality problems
100
Troubleshooting

Solving print quality problems

The information in the following table may help y ou solve print quality problems. If these suggestions still do not corr ect the
problem, call for service. You may have a printer part that requires adjus tment or replacement.
Problem Action
Print is too light. The toner may be low.
Change the Toner Darkness setting in the Quality menu.
Change the Brightness setting in the Quality menu.
Change the Contrast setting in the Quality menu.
If you are printing on an uneven print surface, change the Paper Weight and Paper
Texture settings in the Paper menu.
Verify the correct print media is being used.
Toner smears or print comes
off the page. If you are printing on an uneven print surface, change the Paper Weight and Paper
Texture settings in the Paper menu.
Verify the print media is within the printer specifications. See Understanding paper
and specialty media guidelines on page35 for more details.
If the problem continues, turn the printer off and contact the place you bought your
printer.
Toner appears on the back of
the printed page. Toner is on the transfer roll. To help prevent this, do not load print media that is smaller
than the page size of the job to be printed.
Open and close the printer top front cover to run the printer setup cycle and clean the
transfer roll.
Toner fog or background
shading appears on the page. Check the photoconductor kit to make sure it is installed correctly.
Replace the photoconductor kit.
ABCDEF

ABC

DEF

ABC

DEF