Loading Letter or A4 size print media in the short-edge feed orient ation
58
Printing
Loading Letter or A4 size print media in the short-edge feed orientation
In order for the printer to recognize letter or A4 size print media loaded in the short-edge feed orientation, Short-edge
Printing must be enabled.
1Make sure the printer is off.
2Press and hold the and buttons while you turn the printer on.
3Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4Press until Short-edge Printing appears, and then press .
Disabled appears on the second line of the display.
5Press or to change the setting to Enabled, and then press .
Submitting Selection appears briefly on the display, an d then is re place d b y Conf ig Menu on the first line and
Short-edge Printing on the second line.
6Press and release or until Exit Config Menu appears, and then press .
Activating Menu Changes appears briefly, followed by Performing Self Test. The printer returns to Ready.

Setting up trays with different orientations

We recommend that you use the custom type settings to differentiate print media of the same size with different
orientations. For example, if you want to have letter-size paper loaded into both standard trays, but one in the long-edge
orientation and one in the short-edge orientation, you could set up the trays as follows:
Tray 1 : Long-edge Fed; Paper Size=Letter; Paper Type=Plain
Tray 2 : Short-edge Fed; Paper Size=Letter; Paper Type=Custom Type 1
By setting the printer menus like this, you can easily choose which orientation you want to use for a print job by selecting
the appropriate tray.

Changing the Custom Type Name

You can use the printer Embedded Web Server or MarkVisi on to define a na me other than "Custom Type [x]" for each of the
custom media types that are loaded. When a custom name is defined for a Custom Type, then the printer displays this
name wherever it would normally display "Custom Type [x]".