Printing A5/Statement or JIS-B5/Executive sizes
69
Printing
Printing A5/Statement or JIS-B5/Executive sizes
When Auto Size Sensing is set to On, the printer cannot distinguish between Statement and A5 or Executive and JIS-B5.
Follow these directions to change the Size Sensing setting.
Note: This is not necessary when printing from the multipurpose feeder.
1Make sure the printer is off.
2Press and hold the and buttons while you turn the printer on.
3Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4Press until Size Sensing appears, and then press .
Tray 1 Sensing appears on the second line of the display.
5Press and release or to select the input option that has A5/Statement or JIS-B5/Executive loaded, and
then press .
The first line of the display shows the selected input option, and the second line shows the current setting.
6Press or to change the setting to Sense A5/Sense Statement or Sense JIS-B5/Sense Executive, and
then press .
Submitting Selection appears briefly on the display, an d then is re place d b y Conf ig Menu on the first line and
Size Sensing on the second line.
7Press and release or until Exit Config Menu appears, and then press .
Activating Menu Changes appears briefly, followed by Performing Self Test. The printer returns to Ready.