IBM 390E manual For Windows NT Or OS/2 Users, Hibernation Mode

The computer also exits suspend mode when timer condi- tions are satisfied for entering hibernation mode.

Hibernation Mode:		For Windows NT		or OS/2
users:
A Windows NT		or OS/2 user cannot create			a	hibernation
file in a Windows NT or			OS/2	system that	uses		the
NTFS/HPFS	format	system. If you want to use hibernation
mode, you should reinstall Windows NT with					a	FAT	format
system. Also,		if boot manager is installed, the computer
cannot	enter	hibernation	mode.

Note: Before using hibernation mode, you need a hibernation file.

In hibernation mode, the following occurs:

ŸThe system status, RAM, VRAM, and setup data are

stored on the hard disk.

ŸThe system is powered off.

Notes:

1. In the ThinkPad Configuration program, the computer can be set to suspend when docked.

2. The computer cannot enter hibernation mode when it is attached to the ThinkPad Port Replicator with Advanced Etherjet Feature.

Events that cause the computer to enter hibernation mode:

ŸHibernation mode requested by function key (Fn+F12).

ŸTimer conditions are satisfied in suspend mode when

hibernate by timer is enabled.

Ÿ A critically low battery condition occurs.

ŸThe power switch is pressed. (BIOS Setup)

The	compute		exits hibernation mode			and resumes opera-
tion	when the power-on switch is pressed. When power is
turned on,		the		hibernation file in		the boot record on the
hard	disk	drive		is	read and the system status is restored
from	the	hard		disk	drive.
The	following		events		cause the computer to resume opera-
tion	from	hibernation			mode.

Ÿ The power switch is pressed.

Ÿ The real time clock alarm is signaled.

ŸWake on LAN occurs.

How	to	Create			the	Hibernation	Function:	Do as
follows:
Ÿ	Start		the		ThinkPad Configuration			program.
Ÿ	Click	on		thePower		Management	icon.
Ÿ	Click		on	theHibernation Options			tab.

ThinkPad 390E 37