Features and specifications
The following table provides a summary of the features and specifications for your
BladeCenter unit.
Table1. Features and specifications
Media tray (on front):
vDiskette drive: 1.44 MB
vCD-ROM drive: IDE
vUniversal Serial Bus (USB) v1.1 port
vFront system LED panel
Module bays (on rear):
vFour hot-swap 220-volt
power-module bays
vTwohot-swap management-module
bays
vFour hot-swap I/O-module bays
vTwohot-swap blower bays
Blade bays (on front):
14 hot-swap blade bays
Redundant cooling:
Twovariable-speed hot-swap blowers
Power modules:
vStandard: Two1200-watt or greater
220-volt (200-240 V ac) hot-swap
power modules
– Both power modules supply 12 V
power to all modules and to blade
bays 1 through 6
– Both power modules provide
redundancy to each other
vMaximum: Four
– Power modules 1 and 2 supply 12
V to all modules and to blade
bays 1 through 6
– Power modules 3 and 4 supply 12
V to blade bays 7 through 14
– Power modules 1 and 2 provide
redundancy to each other
– Power modules 3 and 4 provide
redundancy to each other
I/O modules:
vStandard: None
vMaximum: Four
Management module:
vStandard: One hot-swap management
module providing the following features:
– System-management functions for
the BladeCenter system
– Video port (analog)
– PS/2
®
keyboard port
– PS/2 mouse port
– 10/100 Mb Ethernet remote
management connection
vMaximum: Twohot-swap management
modules: one active, one redundant
Upgradeable microcode:
vManagement module firmware
vI/O module firmware (not all I/O module
types)
vBlade server service processor firmware
Security features:
vLogin password for remote connection
vSecure socket layer (SSL) security for
remote management access
Predictive Failure Analysis
®
(PFA)
alerts:
vBlowers
vBlade-dependent features
Size (7U):
vHeight: 304.2 mm (12 in. or 7 U)
vDepth: 711.2mm (28 in.)
vWidth: 444 mm (17.5 in.)
vWeight:
– Fully configured with modules and
blades:Approx. 108.86 kg (240 lb)
– Fully configured without blades:
Approx. 44.91 kg (99 lb)
Acoustical noise emissions:
vWithout acoustics module option:
– Sound power,idle: 7.4 bels maximum
– Sound power,operating: 7.4 bels
maximum
vWith acoustics module option:
– Sound power,idle: 6.9 bels maximum
– Sound power,operating: 6.9 bels
maximum
Environment:
vAir temperature:
– BladeCenter unit on: 10° to 35°C (50° to
95°F).Altitude: 0 to 914 m (2998.69 ft)
– BladeCenter unit on: 10° to 32°C (50° to
89.6°F).Altitude: 914 m to 2134 m
(2998.69 ft to 7000 ft)
– BladeCenter off: -40° to 60° C (-40° to
140° F).
vHumidity:
– Server on: 8% to 80%
– Serveroff:8%to80%
Electrical input:
vSine-wave input (50-60 Hz single-phase)
required
vInput voltage:
– Minimum: 200 V ac
– Maximum: 240 V ac
Heat output:
Approximate heat output in British thermal
units (Btu) per hour
vMinimum configuration: 1365 Btu/hour (400
watts)
vMaximum configuration: Variesdepending
on the type of power supplies installed.
– Four 1200-watt power supplies: 9622
Btu/hour (2820 watts)
– Four 1400-watt power supplies: 11111
Btu/hour (3256 watts)
For all other power supplies, see the
documentation that comes with the power
supply.
Notes:
1. For details about the BladeCenter unit port specifications, see “Input/output
connectors” on page 26.
2. For information about which types of I/O modules can be installed in which
I/O-module bays, see “I/O modules” on page16.
3. The operating system in the blade server must provide USB support for the
blade server to recognize and use the keyboard, mouse, CD-ROM drive, and
diskette drive. The BladeCenter unit uses USB for internal communication with
these devices.
6BladeCenter Type8677: Installation and User’s Guide