Each of these two additional I/O modules provides one internal connection to the optional I/O expansion card, up to 14 internal connections per I/O module.
Reliability, availability, and serviceability
Three of the most important features in server design are reliability, availability, and serviceability (RAS). These factors help to ensure the integrity of the data stored on your blade server; that your blade server is available when you want to use it; and that should a failure occur, you can easily diagnose and repair the failure with minimal inconvenience.
The following is a list of some of the RAS features that your BladeCenter unit supports:
vShared key components, such as power, cooling, and I/O
vAll components serviced from the front or rear of the chassis
vAutomatic error retry and recovery
vAutomatic restart after a power failure
v
v
vCustomer support center 24 hours a day, 7 days a week2
vError codes and messages
v
vRemote system management through the management module
vRemote management module firmware upgrade
vRemote upgrade of blade server service processor microcode
v
vPredictive Failure Analysis (PFA) alerts
vRedundant components
–Cooling fans (blowers) with
–Power modules
–Management modules
v
–Cooling fans (blowers) with
–Power modules
–Management module
–I/O modules
–Blade servers
–Media tray
vSystem automatic inventory at startup
vSystem error logging
2. Service availability will vary by country. Response time varies; may exclude holidays.
