Keyboard differences for the following keyboards are shown in the

System

Operation for New Users

book.
vIBM-enhanced keyboard
v122-key typewriter keyboard
v5250 keyboard
vPersonal computer or personal computer ATstyle keyboard
vPersonal computer or personal computer AT5250 style keyboard
vIBM-enhanced personal computer keyboard

Personal Computer Keyboards

If your personal computer uses the Client Access Workstation Function (WSF), you
can display the layout of your 5250 keyboard using the Work Station Function Keys
(WSFKEYS) command. Youcan alter the style using the Configure Work Station
Function (CFGWSF) command. These commands are discussed in the

Client

Access/400 for DOS with Extended Memory Setup

book. If your personal computer
does not use the workstation function, refer to the appropriate documentation for
your emulator (for example, OS/2 CM/2) to view or change the keyboard style.

TN3270—Minus Sign

If you specified the value *YES for the numeric lock keyboard parameter of the
STRTCPTELN command, if you are using a data entry keyboard, and if the cursor
is located in a numeric-only field, then do the following to display a minus sign.
Todisplay a 5250 minus sign:
1. Press the Num (Numeric) key.
2. Press the minus sign (−) key.
Todisplay a 3278 minus sign, press the minus sign key.

TN3270—Page Down and Page Up

If the 3270 application has a display that does not allow all the input data fields to
be viewed, use the 5250 Page Down and Page Up keys to enter data when the
maximum number of input fields on the display is exceeded.
Youcan also assign PF and PA functions to the page keys by specifying their use
on the STRTCPTELN command.
The cursor always appears as an underline on both 5250 and 3270 displays.
TN3270—Screen Size
Telnet3270 full-screen mode requirements:
vIf the negotiated 3270 device type requires 1920 characters, the AS/400 Telnet
client code will run with any 5250 device type as the client terminal.
vIf the negotiated 3270 device type requires 3564 characters, the AS/400 Telnet
client code requires either a 3180 Model 2, 3197 Model D1, D2, W1, W2, or
3477 Model FA, FC, FD, FE, FG, or FW 5250 device type as the client terminal.
Chapter5. TelnetClient 161