Perform the following steps to install TCP/IP on yourAS/400 system:
1. Insert your installation media for TCP/IP into yourAS/400. If your installation
media is a CD-ROM, insert it into your optical device. If your installation media
is a tape, insert it into your tape drive.
2. Type GO LICPGM at the command prompt and press Enter to access the Work
with Licensed Programs display.
3. Select option 11 (Install licensed programs) on the Work with Licensed
Programs display to see a list of licensed programs and optional parts of
licensed programs.
4. Type 1in the option column next to 5769TC1

TCP/IP Connectivity Utilities for

AS/400

licensed program. The Confirm Licensed Programs to Install display
shows the licensed program you selected to install. Press Enter to confirm.
5. Fill in the following choices on the Install Options display:
vInstallation Device
Type OPT01, if installing from a CD drive.
Type TAP01,if installing from a tape drive.
vObjects to Install
The Objects to Install option allows you to install both programs and
language objects, only programs, or only language objects.
vAutomatic IPL
The Automatic IPLoption determines whether the system automatically starts
when the installation process has completed successfully.
When TCP/IP successfully installs, either the Work with Licensed Programs
menu or the Sign On display appears.
Note: For more detailed information about installing software, including
objects to install and the automatic IPL option, refer to the

Software

Installation

, SC41-5120-03 book.
6. Select option 50 (Display log for messages) to verify that you have installed the
licensed program successfully. If an error occurs, you will see the message Work
with licensed program function not complete on the bottom of the Work with
Licensed Programs display.
Touse TCP/IP, you must configure it after you have completed the installation. See
“Configuring TCP/IP using the Command Line Interface”on page 29.
TCP/IP Addressing
TCP/IP addressing uses a unique Internet Protocol (IP) address for a specific node
in a TCP/IP network. Each node on a network is known as a

host

and has a unique
address.
Youcan assign your own addresses within your own network. To connect to the
Internet, the InterNIC assigns your network addresses and domain names. For
more information about how to contact the InterNIC registration services, see
Table1 on page 4.
TCP/IP addressing is comprised of two parts: The TCP/IP address itself and the
subnet mask. The TCP/IP address is a 32-bit integer that contains both a network
portion and a host portion. This address is usually expressed in the decimal form
24 OS/400 TCP/IPConfiguration and Reference V4R4