IBM OS/390 manual Task Management Commands, Command Short Code Form Verb

10.4.3.1	Queue Management Commands
Table 24.	Queue Management Commands
POWER		PWR	Function	JES2
Command		Short		Command
Code		Form		Verb
PALTER		A	Alter processing attributes of a POWER job or a	$T
			POWER controlled partition
PDELETE		L	Delete queue entries	$P
PDISPLAY		D	Display the status of jobs, messages, resources,	$D
			and the network
PHOLD		H	Put a job of a queue in hold/leave state	$H
POFFLOAD		O	Save or restore entries of a queue.	$S OFF
PRELEASE		R	Release a POWER job for further processing	$A

10.4.3.2 Task Management Commands

Table 25. Task Management Commands

POWER	PWR	Function	JES2
Command	Short		Command
Code	Form		Verb
PACT		Activate a transmitter or a receiver.	$S
PCANCEL	C	Cancel a POWER status report or a job in	$C
		execution.
PDRAIN	N	Discontinue transmission or reception of jobs and	$P
		or output by a given task.
PEND		Terminate POWER option.	$P
PFLUSH	F	Terminate the work currently in process for a	$C
		task and allow the task to continue with
		subsequent work
PGO	G	Reactivate a task or partition.	$S
PRESTART	T	Restart a writer task.	$B, $N
PSTART	S	Place a partition under control of POWER, start a	$S
		task, or initiate a session between two nodes.
PSTOP	P	Release a partition from POWER, stop a task, or	$P
		end a link or session between two nodes.

232VSE to OS/390 Migration Workbook