IBM OS/390 manual Using Sdsf Panels for NJE, $D PATHnodename, $D Nxx.′$D NODEyy′

$D PATH(node_name)

Display the path(s) to another node

$D Nxx.′$D NODE(yy)′

Send a command to node xx to display the status of node yy

$D MNn,′Please drain your session′

Send a message to an operator on another node

See JES2 Commands for details. Chapter 4 has good guidance information for NJE operations, and Chapter 5 has detailed command syntax descriptions.

Command Authority for Remote Operators

An operator on one node can send commands to another node, subject to the authorization established by that remote node. In general, an operator is limited to a subset of commands that display and control jobs which are submitted or ªownedº by that node, and devices that are attached to that node. In JES2, this is controlled by the AUTH parameter on the NODE initialization statement.

See the table titled ªRemote Entry Restrictionsº in Chapter 2 ofJES2 Commands which describes the authority required for all JES2 commands.

28.6.2.1 Using SDSF Panels for NJE

The Line and Node panels of SDSF allow you to monitor and manage NJE activity.

See the SDSF Guide and Reference and SDSF Customization and Security for details.

454VSE to OS/390 Migration Workbook