10.3.4.4 Printer Forms Alignment via PSETUP
The PSETUP function is not supported in JES2. See 10.1.1.4, “Printer Forms
Alignment via PSETUP” on page 208 for some alternatives.
10.3.4.5 Separator Page Differences
The IBM provided separator pages are different with JES2. See 10.1.1.5,
“Separator Page Difference” on page 208 for more information.
10.3.4.6 End-of-page Sensing
JES2 does not support end-of-page sensing. See 10.1.1.6, “End-of-page Sensing”
on page 209 for more information.
10.3.4.7 Output Disposition
Conditional processing of output groups can be specified separately for normal
and abnormal job termination. Use the // OUTPUT OUTDISP= statement with the
same terms familiar to the VSE user (WRITE, HOLD, KEEP, LEAVE, PURGE). It
can also be specified in JES2 initialization parameters on a job class or output
class basis.
10.3.4.8 FCB Naming Differences
Both POWER and JES2 use eight-character FCB (Forms Control Buffer) names.
Both also use four-character prefixes dependent on the printer device type.
However, the prefixes are not similar, and the way they are specified is different.

FCB Prefixes

The four-character prefix of the FCB name is based on the device type and
differs between POWER and OS/390.
Table 14. FCB Name Prefixes
Printer Device VSE/POWER OS/390
3203-1 FCB3 FCB2
3203-5 FCB2 FCB2
3211 FCB2 FCB2
3262-5 FCB2 FCB4
3800 FCB1 FCB3
4245 FCB2 FCB2
4248 FCB5 FCB4
5203 FCB4 FCB2
6262-14 FCB2 FCB4
PRT1 FCB2 FCB2
Device
independent
$$$$ n/a
Note: The IBM 3262-5 and 4248 printers can also be run in
3211 compatibility mode, and use the FCB2 prefix.
Chapter 10. POWER and JES2 217