Sanyo PM-8200 Addinga New Contact to Your Personal List

Addinga New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new PCS Ready Link contact:
1. Press R-Link(left softkey)or press to access the PCS Ready
Link List.
2. Press Go to(left softkey),highlight Personal List,and press .
3. Highlight <Add Contact>and press .
– or –
Highlight an entry and press Options(right softkey).Then
highlight Add Contactand press .
If the Personal List is full,you will see a warning message on
the display.(Your phone can store a total of 200 Ready Link
Personal List or Personal Group contacts.)
4. Enter a name for the new contact and press . (This is the
name you will see when calling or receiving a call from the
contact.)
5. Highlight the R-Link Numberfield, enter the contact’s 10-digit
PCS Ready Link number (their PCS Phone number)and
press .
6. Press Save(left softkey)to save the new contact to your
Personal List.
Tip:You are not allowed to use the following symbols during step 4: “:”, “@”, “;”,
“/”, “*”, “)”, and “(”.
Section 2J: Using PCS Ready Link 143