Alert Notification

Your PCS Phone can alert you with an audible tone when you change service areas, once a minute during a voice call, for incoming or missed PCS Ready Link calls, or when a call has been connected.

Service sets alert on or off for network services parameter changes.

Ready Link Calls sets an alert to notify you of PCS Ready Link calls.

R-Link Missed sets an alert to notify you of missed PCS Ready Link calls.

Voicemail sets an alert to notify you of voice messages.

Messaging sets an alert to notify you of text messages.

Minute Beep sets a minute reminder that beeps ten seconds before the end of each minute during a call.

Signal Fade sets an alert to notify you when your phone loses a signal during a call.

To set alerts:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Sounds and press .

4.Select Alerts and press .

5.Select your desired option and press .

6.If you selected Service, Minute Beep, or Signal Fade, select On and

press . If you selected Ready Link Calls, R-Link Missed, Voicemail, or Messaging, select Once or Repeat Alert and press .

To deactivate this feature, select Off during step 6 above.

Tip: Repeat Alert sounds an alert every two minutes for twenty minutes.

Tip: To set alerts for PCS Ready Link calls, see “Setting an Alert Notification for PCS Ready Link Calls” on page 150 for details.

Section 2B: Controlling Your Phone’s Settings

42

Page 54
Image 54
Sanyo PM-8200 manual Alert Notification, To set alerts